Model Overview
Commercial Range CR-80 Aluminium Roller Shutter
Aluminium roller shutters available with numerous options for security and aesthetic.
Designed for excess of 200,000 run cycles CR80 model provides a long term solution to security.
The Guardian Commercial Range 80 extruded aluminium slat is punched ( 150 mm x 55 mm ) providing 62% vision for medium security commercial, retail & counter/cabinet applications. For applications up to 6000mm wide when electrically operated.
Available with the option of polycarbonate glazing.
- Delivers up to 62% Vision
- Polycarbonate glazing option gives external weatherproofing
- Spans widths up to 6000mm
- Can be powder coated special colours if required
- Can be mixed with solid profiles where higher security or only partial vision is required
- Anti fall safety device
- Guardian Safe, 12 volt control unit
Tech Info
Min Width: 900mm
Max Width x Height 6000mm x 5000mm
Max Area: 20sqm
Material: Extruded Aluminium / 9.25kg/m²
Roller Head Plate sizes
Height 1000mm > 1500mm = 200 mm sq
Height 1500mm > 2000mm = 300 mm sq
Height 2000mm > 2500mm = 350 mm sq
Height 2500mm > 3500mm = 400 mm sq
Height 3500mm > 4000mm = 500 mm sq
Fitting Configurations
- Revel Fix
- Face Fix
- Top Fix
Suitable for internal and external fitting
Standard Specifications
- Aluminium construction
- 89 mm ALU lath profile
- 120 mm x 50 mm guide channels
- Guardian Safe voltage control unit
- Anti fall safety break device
- Hold to run operation
- Plug in operation
Aesthetic Options
- 150 mm x 55 mm punched slots - inline standard or brickbond pattern, extra cost
- Polycarbonate glazing
Optional Upgrades
- 3 phase 415 volt operation
- Intruder alarm interface
- Battery back up
- Protective bollards
- Weather seals
- Polyester powder coated finish to a range of BS or RAL colours More info
- Full colour graphical branding - More info
- Coil Casing
Maintenance Packages
Planned preventative maintenance
See our maintenance section or contact us for more information.
Guardians repair and maintenance services and engineers are accredited to the DHF's TS004 Repairs and maintenance standardand
Click here for more information.
Why have your door and shutter systems maintained?
- It is a legal requirement - as failure to show evidence of maintenance could mean prohibition & enforcement notices being served and fines up to £5000 and imprisonment for 2 years. 'Safety In Use', the New European CEN Standards legislation - States that all types of door should be maintained in an efficient state, in efficient working order and in good repair. For further clarification visit www.dhfonline.org.uk.
- Routine maintenance prolongs the operational life of the installation and ensures that the installation is kept in good working order.
- It ensures that the door is working in a safe and efficient condition - helping to prevent accidents and damage which in turn results in down time, effecting work flow, productivity and resulting in loss of revenue.
- It assists in identifying potential problems which can easily be rectified.
