Model Overview
ECONOMY RANGE ECO-ELECTRIC INDUSTRIAL
General Purpose Steel Electric Roller Shutter Models
The ECO-ELECTRIC 3 is the heavy duty model from the Economy range it is a 3 phase ( as standard ) electrically operated roller shutter door with a Flange Mounted or shaft mounted motor assembly.
ECO-DD - Shaft mounted motor configuration suitable for face fixinng
ECO-FM - Flange mounted motor configuration suitable for revel fixing
A low maintenance, economical. safe and secure shutter door suitable for frequent operation in industrial, commercial and agricultural environments where insulation is not a requirement.
Designed and tested for excess of 250,000 run cycles and backed up by our warranty and service packages.
PRODUCT ACCREDITATIONS
The ECO-DD and ECO-FM has been accredited to
BS EN 13241-1:2003
Industrial, commercial and garage doors and gates Product standard - Products w/out fire/smoke resistance
BS EN 12424:2000
Industrial, commercial and garage doors and gates. Resistance to wind load. Classification 3
BS EN 12453:2001
Industrial, commercial and garage doors and gates. Safety in use of power operated doors.
Download brochure and drawings - Here
Download spec - Here
Tech Info
Max Size 60 m2 approx
Larger shutters available speak to our technical department for more information.
Fitting Configurations
- Face Fix ECO - DD
- Revel Fix ECO - FM
Roller Head Plate Sizes
- Height 2000mm -> 4000mm = 350mm
- Height 4000mm -> 5000mm = 450mm
- Height 5000mm -> 6000mm = 450mm
Standard Specifications
- Galvanised steel construction
- 3 Phase motor
- Anti fall device
- Hold to run operation
- Plug in operation
Optional Upgrades
Security
- AUTO BOLT - Heavy Duty Locking System
- SENTINAL - Heavy Duty Security Barrier
- ARES - Anti Cut Upgrade
- Ground padlocks and or bullet locks with interlock safety
- Anti Ram bollards
- LPS 1175 Level 1, 2 , 3 and 4 Insurance upgraded specification
Operation & Controls
- Airlock/Interlocking
- Automatic operation* requires safety pressure edge or infa red safety beams
- Remote control
- Proximity Sensors
- Radar detectors
- Swipe Card
- Digital Keypads
- Pull Cords
- Door status monitoring of modules at remote locations
Safety
- Operation warning light
- Audio operation warning
- Traffic lights
- Protective bollards
- Guardian Clear view window module
Finish
- HPS 200 Plastisol colour finish
- Polyester powder coat finish to BS or RAL number
- Range of corporate branding packages including full colour graphics
Digital Control Systems for Industrial Doors
- 1 touch open and close*
- Digital door status display
- Limit switch setting from ground level
- Programmable door maintenance indicator
- Plug connections between control panel and drive unti
- Operations cycle counter (non-resettable)
- Certified to BS EN 12453
- Fault memorisation
- Connection to BMS system via RJ45 connection
- Connection for a variety of controls
- Auto closing 1-240 seconds**
The Level 1, 2 and 3 control systems meet the requirements of BS EN 12453 and the introduction of a programmable maintenance indicator only further enhances the safety regime for the user and enables maintenance scheduling to be done on an operational basis. * Level 2 model and above. ** Requires optical safety edge system.
Click here for Level 1 Control System details
Click here for Level 2 Control System details
Maintenance Packages
Planned preventative maintenance
See our maintenance section or contact us for more information.
Guardians repair and maintenance services and engineers are accredited to the DHF's TS004 Repairs and maintenance standardand
Click here for more information.
Why have your door and shutter systems maintained?
- It is a legal requirement - as failure to show evidence of maintenance could mean prohibition & enforcement notices being served and fines up to £5000 and imprisonment for 2 years. 'Safety In Use', the New European CEN Standards legislation - States that all types of door should be maintained in an efficient state, in efficient working order and in good repair. For further clarification visit www.dhfonline.org.uk.
- Routine maintenance prolongs the operational life of the installation and ensures that the installation is kept in good working order.
- It ensures that the door is working in a safe and efficient condition - helping to prevent accidents and damage which in turn results in down time, effecting work flow, productivity and resulting in loss of revenue.
- It assists in identifying potential problems which can easily be rectified.
