Model Overview
THERMAL BREAK COMMERCIAL
Great finish with great insulation properties
The Thermal Break Commercial insulated slat is for medium security, retail and counter/cabinet applications. For applications up to 6000mm wide when electrically operated.
A medium strength, insulated high performance rolled profile.
- Certified U value of 4.01 w/m2k
- CFC Free foam filled rolled aluminium or steel profilerelative to size
- Spans widths up to 6000mm with effective heat and sound insulation
- Can be mixed with the CR80 when partial vision is required
- Single and three phase motor options relative to use and size
- Range of control options
- Range of standard factory colour finish's
Download spec - Here
Tech Info
Max Size 60 m2 approx
Fitting Configurations
See our drawings for more information
- Face Fix
- Revel Fix
Roller Head Plate Sizes
- Height 2000mm -> 4000mm = 350mm
- Height 4000mm -> 5000mm = 406mm
- Height 5000mm -> 6000mm = 450mm
Standard Specifcations
- Galvanised twin skin steel lath 90mm x 19mm
- Full weather seals
- 1 touch opening
- Anti fall safety device
Optional Upgrades
- Coil Casing
- Motor Casing
- High speed version available offering 550mm per second opening times
- CR80 Vision laths
- Operational warning light
- Audio operation warning
- Traffic lights
- Protective bollards
Security Upgrades
- SENTINAL - Heavy Duty Security Barrier
- LPS 1175 Level 1, 2 , Insurance upgraded specification
- Ground padlocks and or bullet locks with interlock safety
- Anti Ram bollards
Operation & Control Options
- Airlock / Interlocking
- Automatic operation* requires safety pressure edge or infa red safety beams
- Remote control / operation
- Proximity Sensors
- Radar detectors
- Swipe Card
- Digital Keypads
- Pull Cords
- Door status monitoring of modules at remote locations
Standard Factory Finishes - Aluminium
Sizes up to 3.5m x 3.5m
White (RAL 9010)
Red (RAL 3004)
Blue (RAL 5001)
Light Beige (BS 08817)
Brown (RAL 8019)
Fir Green (RAL 6009)
Light Grey (RAL 7038)
Metallic Silver (RAL 9006)
Anthracite (RAL 7016)
Black (RAL 9005)
Standard Factory Finishes - Steel
Sizes up to 5750mm x 5750mm
White (RAL 9010)
Poppy Red (BS04E53)
Ocean Blue (BS18 C39)
Goosewing Grey (BS10 A05)
Olive Green (BS12 B27)
Digital Control Systems for Industrial Doors
- 1 touch open and close*
- Digital door status display
- Limit switch setting from ground level
- Programmable door maintenance indicator
- Plug connections between control panel and drive unti
- Operations cycle counter (non-resettable)
- Certified to BS EN 12453
- Fault memorisation
- Connection to BMS system via RJ45 connection
- Connection for a variety of controls
- Auto closing 1-240 seconds**
The Level 1, 2 and 3 control systems meet the requirements of BS EN 12453 and the introduction of a programmable maintenance indicator only further enhances the safety regime for the user and enables maintenance scheduling to be done on an operational basis. * Level 2 model and above. ** Requires optical safety edge system.
Click here for Level 1 Control System details
Click here for Level 2 Control System details
Maintenance Packages
Planned preventative maintenance
See our maintenance section or contact us for more information.
Guardians repair and maintenance services and engineers are accredited to the DHF's TS004 Repairs and maintenance standardand
Click here for more information.
Why have your door and shutter systems maintained?
- It is a legal requirement - as failure to show evidence of maintenance could mean prohibition & enforcement notices being served and fines up to £5000 and imprisonment for 2 years. 'Safety In Use', the New European CEN Standards legislation - States that all types of door should be maintained in an efficient state, in efficient working order and in good repair. For further clarification visit www.dhfonline.org.uk.
- Routine maintenance prolongs the operational life of the installation and ensures that the installation is kept in good working order.
- It ensures that the door is working in a safe and efficient condition - helping to prevent accidents and damage which in turn results in down time, effecting work flow, productivity and resulting in loss of revenue.
- It assists in identifying potential problems which can easily be rectified.
