Protection, airflow and visibility
The AIR WAVE perforated and punched is one of our most highly desired and affordable products. Designed very similar to our CLEAR WAVE, the AIR WAVE uses the same hinge and hangar technology to insure top quality in relation to industry standards.
AIR WAVE Perforated - small circular punched holes are made in a painted steel sheet to grant air and light circulation.
AIR WAVE Slotted – 6mm x 32mm punched oblong slots in even horizontal columns.
Both designs expose the secure area visually while providing a rigid physical barrier.
Side acting top hung sliding folding grille
Curtain constructed of 1.83mm x 152mm aluminium panels. Panels framed by full height butt hinges on 178mm centres, full height between top and bottom closure panels. Perforated Steel Panels are made of 3.2mm x 152mm steel panels, full height between top and bottom closure panels. Panels perforated with 9.5mm diameter round holes in a staggered pattern. Calculated airflow, Through Panel: 47%, Through Closure: 39%.
Tracks & Trolleys
The overhead track is 34mm w x 46mm h thick extruded aluminum section with continuous recess for splice tongues and pins. Standard curves are available with 254mm or 356mm radius. Custom radius curved track is available to suite most conditions.
29mm diameter nylon tired ball bearing wheels; two wheel assembly at each hanger; three wheel assembly at all vertical members.
Standard factory finishes are 10 micron clear anodizing, K1285 (white), K70632 (light bronze), K71232 (medium bronze) or K90421 (black) Duracron acrylic paint. Optional acrylic paint is available upon request to match RAL Colours (Consult factory).
Manual push/pull operation.
The grille incorporates 33mm x 62mm vertical posts spaced not to exceed 3000mm on center and located at each curve. Lead posts utilize concealed, masterkeyable cylinder operated hook-bolt with lock operable from both sides of curtain or optional thumb turn cylinder lock operable from tenant side of curtain that engages a full height wall channel. Intermediate posts provided with concealed, masterkeyable cylinder operated bottom ratcheted drop bolts with lock operable from interior or exterior side of the opening. Posts with drop bolts include dust proof stainless steel floor sockets.
The locking knobs are manufactured with heavy-duty aluminum construction.
The locking posts have a unique self-adjusting locking rod with 6 different positions of adjustments to allow for deflections in bulkheads and irregularities in finished flooring. This post allows replacing or servicing of the locking post without removing the entire door. Also lead and end posts have special softly padded astragals that prevent damage too adjacent finished such as glass or mirror pocket doors and columns.
Weight & Stacking
Grille weight is approximately 10 kg/m2. Grille support must be able to carry the weight of a fully stacked door at any point along its length.
Minimum stacking is 87.5mm/metre of opening plus 89mm per locking member (consult factory for critical project specific stack dimensions).
Factory supplied pocket doors are an available option with all side-folding units. Pocket doors stop at the underside of the track and look better aesthetically when the track is recessed in the ceiling or soffit. Pocket doors and frames are fabricated from A36 HR steel, USS 12-gauge. Hinges are 76.2mm non-mortise type. Lock is a 25.4mm security mortise cylinder. Standard finish is a phosphate treatment followed by a light gray baked-on polyester powder coat; minimum 0.065mm cured film thickness. Optional RAL colors are available.
Emergency Egress Doors
Emergency egress doors are an available option on Guardian side-folding grilles. Egress doors to be fabricated from the same material and pattern as the grille curtain and be provided with a thumb turn lock on the secure side of the opening.