HORIZONTAL SHUTTER HR-DD
Heavy Duty Horizontal Steel Roller Shutters
Heavy duty roller shutter, designed for horizontal installation, operated as standard via a direct drive mounted motor.
Tech Info
- Max size: 5m x 5m
- Weight: 12kg/m2
Standard Specification
- Galvanised twin skin steel lath 90mm x 24mm
- Insulated to 0.69 kmw/m2 approx
- Full weather seals
- One touch opening
- Anti-fall safety device
- Wind loading protection
- Door operation counter
Colour Finish
- HPS 200 Plastisol colour finish
- Polyester powder coat finish to BS or RAL number
- Range of corporate branding packages available
General Options
- Coil casing
- Motor casing
- Operation warning light
- Audio operation warning
Fitting Configurations
- Underside Fix
- Top side fix
- Reveal flush fix
Security
Keyswitch Lockbox
Security box to protect externally mounted keyswitches.
-
Keyswitch Lockbox
Security box to protect externally mounted keyswitches.
Keyswitch Lockbox
Anti-Tamper Controller
Interfaces directly with a key switch, the shutter is made inoperable if the key switch is attacked by vandals or thieves. The system can also be linked to a burglar alarm further increasing security measures. Has a low voltage control circuit removing the risk of electric shocks, making the product ideal for use in public areas.
-
Anti-Tamper Controller
Interfaces directly with a key switch, the shutter is made inoperable if the key switch is attacked by vandals or thieves. The system can also be linked to a burglar alarm further increasing security measures. Has a low voltage control circuit removing the risk of electric shocks, making the product ideal for use in public areas.
Anti-Tamper Controller
Pinlocks
For additional security, pin locks can be added to a range of shutters. The lock fits into a casting on the roller shutters guide section. The pin fits through this casting and the roller shutter curtain to stop the curtain from attempts at lifting it. For electric doors a safety interlock is recommended to avoid accidentally attempting to open the shutter when locked.
-
Pinlocks
For additional security, pin locks can be added to a range of shutters. The lock fits into a casting on the roller shutters guide section. The pin fits through this casting and the roller shutter curtain to stop the curtain from attempts at lifting it. For electric doors a safety interlock is recommended to avoid accidentally attempting to open the shutter when locked.
Pinlocks
Bottom Rail Lock
ILS lock that connects to bottom bar and extends into guides for extra security.
-
Bottom Rail Lock
ILS lock that connects to bottom bar and extends into guides for extra security.
Bottom Rail Lock
Operation & Controls
- Airlock/Interlocking
- Automatic operation requires safety pressure edge or infared safety beams
- Remote control/operation
- Proximity sensors
- Radar detectors
- Swipe card
- Digital keypads
- Pull cords
Digital Control Systems
- One touch open and close*
- Digital door status display
- Limit switch setting from ground level
- Programmable door maintenance indicator
- Plug connections between control panel and drive unit
- Operations cycle counter (non-resettable)
- Certified to BS EN 12453
- Fault memorisation
- Connection to BMS system via RJ45 connection
- Connection for a variety of controls
- Auto closing 1-240 seconds**
The Level 1, 2 and 3 control systems meet the requirements of BS EN 12453 and the introduction of a programmable maintenance indicator only further enhances the safety regime for the user and enables maintenance scheduling to be done on an operational basis.
* Level 2 model and above
** Requires optical safety edge system
