Guardian Industrial Doors

HIGH SPEED DOOR - FOOD MODEL

Stainless steel construction for lasting cleanliness

The Guardian Speed Food is a high speed door with electric drive for use in the food and any clean room environment . Functionality includes energy saving, draught exclusion and climate control.

The Guardian Food model is a door without balance springs, consisting of an electrically driven door curtain rolled up on a roller above the opening.

The door curtain is made of horizontal sections of polyester-reinforced PVC. The sections are fitted with aluminium sealed-in reinforcement profiles (the aluminium wind bars are encapsulated). The door curtain has a transparent PVC vision section between approx. 1000 and 2000 mm height. The bottom of the door curtain has an aluminium bottom beam with rubber sealing profile.

The door is supplied with stainless steel side guides U-shaped profiles with rubber seals ensures the guidance of the door curtain. The side guides are one unit combined with the bearing plates for the fastening of the roller and drive.

The lateral guide is made of two stainless steel profiles with sealing rubber removable for installation and maintenance. The horizontal roller is steel. The bottom beam is aluminium. The door curtain is 1.2 mm thick PVC with a polyester reinforcement inlay.

Certifications

EN13241-1
EU Construction Products Directive 89/106/EEC
EU Machinery Directive 2006/42/EEC
Low Voltage Electrical Equipment Directive 2006/95/EEC
Electromagnetic Compatibility (EMC) Directive 2004/108/EEC
Resistance to wind loading Beaufort 5

Tech Info

Maximum width: 4000mm
Maximum height: 5000mm
Mains voltage standard: 3N~400V/50Hz/16A
Mains voltage with frequency control: LNPE~230V/50Hz/16AT
Degree of protection: IP54
consumed power: max. 2 kW
Lateral space not drive side (roller height): 160mm
Lateral space at the drive: 310mm
Lateral space at the drive for fitting: min. 550mm
Lateral space at side guide profiles: 110mm
Required space above: 575mm

Structural Provisions

In normal circumstances no special structural provisions are required for the assembly and fitting of a speed roller. For the electrical connection there must be a wall socket within 500mm of where the control box will be positioned (CEE form 3~NPE/400V/50Hz/16A). As standard this is fitted at a height of approx. 1500mm from the floor on the drive side.

Standard Specification

Opening speed: 1.0m/s
Closing speed: 0.5m/s
Curtain: 1.2 mm thick PVC with a polyester reinforcement inlay, concealed joining sections
Aluminium guides
Plug in operation
One vision section
Aluminium bottom bar
3 button control panel one touch opening, auto close

Colour Finish

Polyester powder coat finish to BS colour or RAL number
Range of corporate branding packages including full colour graphics
Stainless steel

General Options

Protective Bollards

Angle Protection

Fitting Configurations

Face fit

Security

Anti-Ram Bollards

Safety

Laser Safety Sensor

Warning Lights

Battery Backup

Traffic Lights

Operation & Controls

Falcon

Milan

Condor

Magic Switch

Activ8

Level 2 Control Panel

Level 3 Control Panel

Keypads

Mushroom Push Button

Push Buttons

Biometric Controls

Smoke & Heat Detector

Access Control Relay

Industrial Remote Control

RFID Radio Controls

Standard Fire Door Interface Panel